Filter
Top Products
36 Avocent Emerge ECMS2000U Extender Installer/User Guide
5. Choose Transmitter Appliance Information. The Transmitter Appliance Information Menu
will appear.
The Transmitter Appliance Information Menu screen contains the following information:
Transmitter name; EID number; release version; application; boot and FPGA firmware version
numbers; and the manufacturing part number. All values are read-only.
Configuring Video Input Settings
The Avocent Emerge ECMS2000U Extender system is capable of transmitting either digital (DVI)
or analog video (VGA) from the remote computer to your monitor. To enable the system to
transmit the appropriate video signal for your monitor, you must first configure the video input
settings for the Transmitter.
NOTE: Video-display problems may occur if video input settings are not configured correctly,
1. Activate the serial menu as described in Accessing the serial menu on page 14.
2. Choose option 2 to access the Transmitter menu. If the password option is enabled, you will be
prompted for a password. See
Authentication on page 24.
3. Type the password and press Enter. The Transmitter Main Menu will appear.
4. Choose Console Settings. The Console Settings Menu will display. The current video input
setting is displayed beside menu item 1. Target Video
Figure 3.25: Transmitter Console Settings Menu