Filter
Top Products
40 Avocent Emerge ECMS2000U Extender Installer/User Guide
To change the audio performance setting for the Receiver:
1. Activate the serial menu as described in Accessing the serial menu on page 14.
2. Choose option 1 to access the Receiver menu. If the password option is enabled, you will be
prompted for a password. See
Authentication on page 24.
3. Type the password and press Enter. The Receiver Main Menu will appear.
4. Choose Console Settings. The Console Settings Menu will appear. The current audio
performance setting is displayed beside menu item 4. Audio Performance.
Figure 3.30: Receiver Console Settings Menu
5. Choose Audio Performance. The Audio Performance Menu will appear.This menu shows you
the audio settings that you can choose from. The current setting is indicated by an asterisk *
Figure 3.31: Receiver Audio Performance Menu
6. Type the number that corresponds to the audio setting you wish to apply and press Enter.
NOTE: If you choose “off,” audio support will be disabled.
7. To confirm your selection and exit the screen, type 0 (zero) and press Enter. The unit resets
after you press
Enter.