Badger Basket N64944-001 Personal Computer User Manual


 
THE BADGER
®
-RADIX
®
User Guide
February 2007
Page 16 of 73
Make a note of the large number you see in the center of the screen. Badger CONNECT
will ask you about this number during the load function.
In Badger CONNECT, choose the Unload Collector page for the Badger-Radix collector
type. To start the process, click on the Unload Collector button. Badger CONNECT will
make the connection to the Loader-Charger(s). If you have one Loader-Charger
connected, the meters will be unloaded. If you have two or three Loader-Chargers,
Badger CONNECT will display a list of “communications addresses”. Choose the one
that matches the number on the display and click OK. The meters will be unloaded.
Steps 2 and 3 on the Unload Collector page remain the same. Verify that the readings are
correct by Viewing Unloaded Reading and then save reading by Uploading Accounts.
Route Information
If you wish to view information about the meters that are currently loaded, from the
Route Transfer screen press the Route Info “I” button.