Badger Basket N64944-001 Personal Computer User Manual


 
THE BADGER
®
-RADIX
®
User Guide
February 2007
Page 49 of 73
behavior will not be carried out. Choosing the values for these settings allows you to
customize the Badger-Radix operation to fit your needs.
To move to the next Settings screen, press the “M” key. To move to the previous
Settings screen, press the “P” key. If you are done, press the “C” key at any of the
settings screens to return to the Utilities menu.
Here’s the list of each of the different settings and how it controls the Badger-Radix’s
operation.
SETTING WHAT IT DOES HOW YOU MIGHT USE
IT
Advance on
High/Low
When a high or low reading is
encountered and this setting is
chosen, the Badger-Radix will
advance the display to the next
account. If not chosen, the Badger-
Radix will continue to display the
current meter being read after the
reading is stored. To move to the
next meter you must press the “N”
for NEXT button.
If you wish to investigate a
high or low reading, leave a
brochure with the customer,
or perform some other
function on a high or low
reading, clear this setting (and
choose the next one as well).
You will be alerted to the
high and low meters by the
audio tones and the display.
Beep on
High/Low
When a high or low reading is
encountered for a meter and this
setting is chosen, the Badger-Radix
will sound the high and low audio
signals. If not chosen, the Badger-
Radix will sound the successful read
audio tone.
If you wish to investigate a
high or low reading, leave a
brochure to the customer, or
perform some other function
on a high or low reading,
choose this setting (and clear
the previous one). You will
be alerted to the high and low
meters by the audio tones and
the display.
Show High and
Low
This setting and the Show Previous
Read setting control the amount of
information available to the meter
reader. When this setting is chosen,
the high and low audit values are
displayed when the View High/Low
button is pressed.
To insure accuracy of the
meter readings, some utilities
will choose to clear this
setting. Other utilities will
choose this setting so that if
an investigation on the
operation of the meter is
needed, this information is
available. You need to
determine which option is
right for you.