Filter
Top Products
24 Coronis Fusion 4MP/6MP
Stand-by switching
USING THE TOUCH KEYS:
1 While the OSD is not on the screen, touch any touch key. As a
result, the control panel illumination is switched on for a few
seconds.
2 While the contol panel illumination is on, touch the stand-by
touch key. A message appears on the screen.
3 Touch the stand-by touch key once more to confirm.
4 To switch the display on while it is in stand-by, touch any touch
key. Next, while the contol panel illumination is on, touch the
stand-by touch key.
USING THE CONTROL WHEEL:
1 While the OSD is not on the screen, click the control wheel shortly.
A message appears on the screen.
2 Click the control wheel once more to confirm.
3 To switch the display on while it is in stand-by, click the control
wheel shortly.
The connected power supply also provides a switch that can be
used to turn the power completely off. To use the display,
please make sure to switch on this power supply. This can be
done by pushing the on/off switch on the power supply into
the "|" position.