Filter
Top Products
40 Coronis Fusion 4MP/6MP
TO ENABLE THE USER CONTROLS AGAIN USING THE TOUCH KEYS:
1 To enter the user controls keycode, the OSD must not be visible.
2 Touch any of the soft touch keys to switch on the front
illumination.
3 While the illumination is on, touch the following keys in successive
order:
Enter
, Down , Up , Down , Enter .
As a result, the User Controls setting in the Settings menu is switched
on again.
TO ENABLE THE USER CONTROLS AGAIN USING THE CONTROL WHEEL:
1 The OSD must not be visible.
2 Press and hold the control wheel for at least 5 seconds.
3 Rotate the control wheel 1 step clockwise.
4 Press the control wheel 2 times.
5 Rotate the control wheel 1 step counterclockwise. The on-screen
display appears.
As a result, the User Controls setting in the Settings menu is switched
on again.
Steps 3 to 5 must be performed in maximum 3 seconds.