Barco 7000 Projector User Manual


 
3. Connections
3.1.7 SDI input
What can be connected ?
This avoids the need for analog processing anywhere in the video production chain and guarantees the ultimate image quality. An
active loop through of the SDI input signal is provided for monitoring or for double or triple stacking applications.
How to connect a SDI source ?
1. Connect the out of your SDI source to the BNC SDI input of the projector. (image 3-6)
Note: The input is always 75 ohm terminated.
2. If loop through is needed, use the SDO output to connect to next device.
Note: The output impedance of the SDO is 75 ohm.
SDI
SDO
S-VIDEO
VIDEO
R
GB
V
7
2
43
10Base-T
G/Y B/PB H/C
V
1
HDSDI
HDSDO
9
RS 232 IN
RS 232 OUT
RC
DVI
H/C
R/PR
95
Image 3-6
How to select slot 7
1. Key in 7on the RCU or the local keypad or use the menu
3.1.8 HDSDI input
What can be connected ?
This avoids the need for analog processing anywhere i
n the video production chain and guarantees the ultimate image quality. An
active loop through of the HDSDI input signal is provided for monitoring or for double or triple stacking applications.
How to connect a HDSDI source ?
1. Connect the out of your HDSDI source to the BNC HDSDI input of the projector. (image 3-7)
Note: The input is always 75 ohm terminated.
2. If loop through is needed, use the HDSDO output to
connect to next device.
Note: The output impedance of the HDSDO is 75 ohm.
R5976455 BARCO ULTRA REALITY 7000 30062003
17