Filter
Top Products
11. Display setup
11. DISPLAY SETUP
Overview
• Full screen representation
• Startup screen
• Textbox
• Take screenshot
• Menu bar position
• Status bar position
• Sliderbox position
• AutoImage Setup
11.1 Full screen representation
Purpose of the Full screen representation
The Full screen represen tation function forces to use the complete native resolution of the LCD panels independe
ntly of the native
resolution of the source.
How to enable/disable the full screen representation ?
1. Press MENU to activate the Toolbar
2. Press → to select the Display setup item
3. Press ↓ to Pull down the Display setup menu
4. Use ↑ or ↓ to select Full screen representation
5. Press → to pull down the menu
6. Use ↓ or ↑ to select ON or OFF
7. Press ENTER
The show nativ e resolution function on the other hand forces to use the native resolution of the source.
The Full screen representation function overrules the show native resolution function.
11.2 Startup screen
What can be done ?
When the startup screen is enabled, the identification screen is displayed for a few seconds at startup. This startup screen can also
be disabled.
How to enable/disable the Startup screen?
1. Press MENU to activate the Toolbar
2. Press → to select the Display setup item
3. Press ↓ to Pull down the Display setup menu
4. Use ↑ or ↓ to select Startup screen
5. Press → to pull down the menu
6. Use ↓ or ↑ to select the desired baudrate
7. Press ENTER
R5976455 BARCO ULTRA REALITY 7000 30062003
73