Filter
Top Products
12. Installation menu
Image 12-13
Image 12-14
The new pass
word is accepted if the new password and the confirmed password coincide.
If the pass
word is forgotten contact a Barco authorized technician.
12.9 Auto file load
What can be done ?
The Auto file load option allows to create automatically an image file whenever a new source is detected, this file is then loaded and
the source can be displayed using the settings of that particular image file.
In some cases however the user may choose to select an image file himself by using the Load (and Edit if necessary) in the Image
files menu, therefore the Auto file load function can be disabled.
The Auto file load option allows a continuous checking of the selected source, if the characteristics of the source change, a new
image file is automatically selected.
When Auto file load is enabled and an incoherent characteristic is detected (for example, no sync ) the back-
ground is displayed (logo, blue or black screen)
Disabling the function implies that the source will be displayed independently of the changed characteristics
(i
mage scrambled in case of no sync)
How to enable/disable the Auto file load function ?
1. Pre
ss MENU to activate the Toolbar
2. Press → to select the Installation item
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select Auto file load (image 12-15)
5. Press → to pull down the menu
6. Use ↓ or ↑ to select ON/OFF
7. Press
ENTER
R5976455 BARCO ULTRA REALITY 7000 30062003
85