Filter
Top Products
7. Image Menu
5. Press → to pull down the menu
6. Use ↓ or ↑ to select On
7. Press ENTER
A white bullet shows the selection
Image 7-4
The default mode is used if the show native resolution and the full screen function are off.
The default mode shows always the native ratio and forces the native resolution
ofthepanels(partofthe
image blanked where needed)
7.4 Blanking
What can be done ?
Blanking adjustments affect only the edges of the project
ed image and are used to frame the projected image on to the screen and
to hide or black out unwanted information (or noise). A ’0’ on the bar scale indicates no blanking.
Which blanking adjustments are available ?
• top blanking
• bottom blanking
• left blanking
• right blanking
R5976455 BARCO ULTRA REALITY 7000 30062003
47