Filter
Top Products
6. General Menu
6.8 Reset runtime
When to reset the lamp runtime ?
The lamp runtime should only be reset when placing a new lamp.
How to reset the lamp runtime ?
1. Press MENU to activate the Toolbar
2. Press → to select the General item
3. Press ↓ to Pull down the General menu
4. Use ↑ or ↓ to select Reset runtime
5. Press → to pull down the menu
6. Use ↑ or ↓ to select the lamp to be reset (image 6-13)
7. Press ENTER
A dialogbox is displayed (image 6-14)
8. Use ←or →, the numeric keys on the remote, or the keypad to change the serial number of the lamp (serial number 0000000 w
ill
not be accepted).
Image 6-13
Image 6-14
Lamp run
time reset as well as the lamp replacement can only be done by a Barco authorized technician.
6.9 Runtime warning
What can be done ?
When the lamp hasreached a certain predetermined runtime , a warning message willbe displayedon the screen. The lamp runtime
warning can be set in a range from 30 to 200 hours. The runtime warning is displayed by default at 30 hours before end of lamp
li
fetime.
40
R5976455 BARCO ULTRA REALITY 7000 30062003