Filter
Top Products
12. Installation menu
Image 12-5 Image 12-6
Entering the new projector address ?
1. Enter the new projector address with the digit keys on the RCU, the local keypad or the cursor keys.
This address must be between 0 and 255.
How to change the common RC5 address ?
1. Press MENU to activate the Toolbar
2. Press → to select the Installation
3. Press ↓ to Pull down the Installati
on menu
4. Use ↑ or ↓ to select Projector address
5. Press ENTER
A dialogbox appears on the screen. (image 12-7, image 12-8)
Image 12-7 Image 12-8
Entering the new common address ?
1. Enter the new projector address with the digit keys on the RCU, the local keypad or the cursor keys.
This address must be between 0 or 1.
12.3 Orientation
Projector orientations
Depending on how the projector is oriented, the projector’s internal settings have to be adapted.
How to change the orientation ?
1. Press MENU to activate the Toolbar
2. Press → to select the Installation item
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select Orientation
5. Press → to pull down the menu
6. Use ↓ or ↑ to select the desired orientation (image 12-9)
7. Press ENTER
The projection is adapted and a black bullet shows the active configuration.
R5976455 BARCO ULTRA REALITY 7000 30062003
81