Barco 9200 Projector User Manual


 
Connections
5-3
5975967 BARCOGRAPHICS 9200 221297
S-VIDEO
98 27900
VIDEO
LR
AUDIO
On On
Video input
Audio input not
available
S-Video input
Floating
Non-Floating
TV tuner, e.g.
TVDM 40 stereo
VCR
Audio amplifier
Composite
Video
VCR S-VHS
Luma/Chroma
RGB V
R
G
B
H / C
V
On
98 27910
RGB
H / C
V
H
RS 232 IN
REMOT E
PROJECTOR MODE :
GREEN - OPERATION
RED - STANDBY
COMMUNICATION PORT
(8 00-PERIPHE RA LS )
RS232 OUT
IR -ACKNO WLEDGE D
IR-RECEIVED
DIAGNOSTICS
CODE IR-RECEIVER
Select with or
then <ENTER>
<EXIT> to return.
Select with or
then <ENTER>
<EXIT> to return.
INPUT SLOTS
INSTALLATION
INPUT SLOTS
CONVERGENCE
CONFIGURATION
OSD COLOR
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Slot Module type [Config]
1. RGB-SS [CV]
2. RGB-SOG
3. Video [Video]
4. Component Video
Video/S-video input module
To the Video input :
Composite video signals from a VCR, OFF air signal decoder, etc...
1 x BNC 1.0Vpp ± 3 dB
To the S-Video input :
Separate Y-luma/C-chroma signals for higher quality playback of
Super VHS-signals.
1 x 4 pins plug (mini DIN)
pin configuration :
1 ground luminance
2 ground chrominance
3 luminance 1.0 Vpp ± 3 dB
4 chrominance 282 mVpp ± 3 dB
Input selection :
Key in the corresponding slot number on the RCU or the local
keypad. Depending on the priority setting in the Input slots
menu, Video or S-Video will be displayed. If the wrong source
type is displayed, start up the adjustment mode by pressing
ADJUST or ENTER.
Push the control disc key forward or backward to highlight System
settings and press ENTER to display the 'System Settings menu'.
EXIT returns to operational mode.
Use the control disc to select 'Input Slots' by pushing it forward or
backward and press ENTER. The internal system will scan the inputs
and displays the result in the 'Input Slots menu'.
Push the control disc forward or backward to select the correspond-
ing (video or S-video) input slot number.
To change the priority between Video and S-Video, press ENTER key
to toggle.
Straps on module level.
Floating or non-floating input.
Video input :
J11 : strap "yes" : non floating strap "no" : floating
S-Video input :
J12 : strap "yes" : non floating strap "no" : floating
J13 : strap "yes" : non floating strap "no" : floating
Factory preset : strap on, input non floating.