Filter
Top Products
Service Mode
11-4 5975947 BARCOGRAPHICS 9200 120297
How to change the password ?
Highlight Change password by pushing the control stick forward or
backward and press ENTER to display the Change Password menu.
Select with or
then <ENTER>
<EXIT> to return.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
LAMP POWER : 1500W
MORE...
CHANGE PASSWORD
Enter new password
0000
Select with or
then <ENTER>
<EXIT> to return.
The old password is displayed and can be changed by entering the
digit with the numeric keys of the RCU or local keypath.
Press ENTER to save the new entered password.
Press EXIT if no changes have to be made.
ENTER displays the Change Password menu
EXIT returns to the adjustment selection menu.
ADJUST returns to operational mode.
Change Language
Highlight Language by pushing the control stick forward or backward
and press ENTER to select the Language Selection menu.
Available languages : English and French.
Select with or
then <ENTER>
<EXIT> to return.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
DIMMING
MORE...
CHANGE LANGUAGE
English
Français
Select with or
then <ENTER>
<EXIT> to return.
Change Projector Address
Every projector requires an individual address between 0 and 255.
This address can be software installed.
To change that address, push the control stick forward or backward
to highlight Change Proj. Address and press ENTER. The Change
Projector Address menu will be displayed and the actual address will
be filled in. The first digit is highlighted. Enter the new projector
address with :
- the digit keys on the RCU or the local keypad or
- use the control stick to the right or to the left to select a digit and
change the value by pushing the control stick forward or backward
until the new value is reached. Continue with the other digits on the
same way.
Select with or
then <ENTER>
<EXIT> to return.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
LAMP POWER : 1500W
MORE ...
CHANGE PROJ. ADDRESS
Enter new address
001
Select with or
Reprogram with or
or numeric keys
<ENTER> to confirm
<EXIT> to return
Change Baudrate PC
The communication speed between projector and computer, e.g. PC
or MAC, has 8 possible speeds. The baud rate speed can be
software set up.
Highlight Change Baud rate PC by pushing the control stick forward
or backward and press ENTER to display the Change Baudrate PC
menu.
Select with or
then <ENTER>
<EXIT> to return.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
LAMP POWER : 1500W
MORE...