Filter
Top Products
8-9
Random Access Adjustment Mode
5975967 BARCOGRAPHICS 9200 070398
Select with or
then <ENTER>
<EXIT> to return.
Bottom blanking
Top blanking
Right blanking
Left blanking
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
OPTIONS
Select with or
then <ENTER>
<EXIT> to return.
Side Keystone
Highlight Side Keystone by pushing the control disc up or down and
press ENTER to select.
The side keystone adjustment is used to align the image if the projector
is mounted at a non standard projection angle.
Push the control disc to the right or to the left to adjust the keystone
of the image.
When the upper part of the image is wider than the lower part of the
image, push the control disc to the left. The number indication below
the bar scale will be negative.
When the upper part of the image is smaller than the lower part of the
image, push the control disc to the right. The number indication below
the bar scale will be positive.
Blanking
Highlight Blanking by pushing the control disc up or down and press
ENTER to select.
Blanking adjustments affect only the edges of the projected image
and are used to frame the projected image on to the screen and to
hide or black out unwanted information (or noise). A '0' on the bar
scale indicates no blanking.
The following blanking corrections are possible :
top blanking
bottom blanking
left blanking
right blanking
When Reset is selected, the 4 blanking settings are set to zero. The
saved settings are erased.
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
OPTIONS
BLANKING
TOP
BOTTOM
LEFT
RIGHT
RESET
Select with or
then <ENTER>
<EXIT> to return.