Filter
Top Products
MatrixPRO-II DVI 16x16 Router
________________________________________________________________________
User’s Guide Rev. 04
18
4 Front Panel Operation
4.1 LINK mode
▪ It configures input / output connections for cross-switching.
1) Press LINK key button.
2) Press an input key button - LCD will display current connected output.
3) Press single or multiple output key buttons to select desired outputs.
4) Outputs can be deselected by pressing the output key button again.
5) Press ENTER key button to save the configuration.
6) To configure next Input / output connection, repeat steps 1 to 5.
4.2 UNLINK mode
• It unlinks input /output connection.
1) Press LINK key button.
2) Press SHIFT key button. “UnLINK” should now be displayed.
3) Press the input key button for the routing you would like to clear.
4) Press ENTER key button.
4.3 PRESET mode
(“SHIFT ON PRESET”)
• Provides the ability to save the current routings to a specified preset number. The
preset routings can then be recalled at a later time.
1) Press SHIFT key then press FUNC key button.
2) The unit is now in Preset LOAD mode.
3) Pressing SHIFT key again will allow you to toggle between Preset Load and Preset
Save.
4) Using inputs keys 3 & 4 will allow you to select a preset number
5) Pressing the input 1 key from the Preset Save screen will save your routings to
the preset number that you have selected.
6) Pressing the FUNC key button will toggle to the Preset LOAD screen
7) Using input keys 3 & 4 will allow you to select the preset number you would like to
load.
8) Pressing the input 1 key from the Preset Load screen will load the routings that
you previously saved to that preset number.
9) Performing a Factory Reset will clear all previously saved Presets.
*Default of preset is “unlink” of all inputs and outputs. If no routings were
previously saved to a preset number and that preset number is loaded then all
inputs and outputs will be unlinked.