Filter
Top Products
MatrixPRO-II DVI 16x16 Router
________________________________________________________________________
User’s Guide Rev. 04
23
2) Select an input port by pressing input key 5 or 6.
3) Press input 3 or 4 key button to change EDID mode.
3-1) If you select Default Mode, default EDID will be restored for allocated
inputs.
===EDID Configure===
Input: 01 Default
Default Mode?
1: Y 2: N 3: << 4: >> 5: ∨ 6: ∧
Press input 1 key button then, the MATRIXPRO-II DVI 16x16 will recover
the Default EDID to allocated input as below.
===EDID Configure===
EDID Copying….
EDID Reading….
3-2) If you select Auto Mix Mode, mixed EDID of all attached displays will be
saved in allocated input.
3-3) If you select Output Copy Mode, MATRIXPRO-II DVI 16x16 reads EDID
from any target displays and copies it in allocated input.
3-4) If you select Resolution Mode, the EDID can be selected from a list of
different resolutions. See table 7-9 for the available resolutions.
New EDID can be created or existing EDID can be modified using the Edit Data Mode. This
feature is recommended for advanced users only.
▪ Improper EDID setting can compromise the stability of the system
▪
Not all computer graphics cards will be able to output a custom EDID resolution.
▪ Be sure that you fully understand this feature prior to use.
For further information, please contact folsomsupport@barco.com