Filter
Top Products
MatrixPRO-II DVI 16x16 Router
________________________________________________________________________
User’s Guide Rev. 04
22
4.4.7 Monitoring Output
▪ It allocates input to Monitor Output port for monitoring uses.
▪ The cursor shows that it is selected and activated.
▪ Input 3 key button decreases the number.
▪ Input 4 key button increases the number.
=Monitoring Output=
Old Input: 01
New Input: 01
1) Connect a display to the Monitoring Output port and any video sources to the
DVI input ports on the real panel.
2) Select an input port by pressing input 3 or 4 key button.
3) Press ENTER key button to complete the process.
4.4.8 EDID Configure
▪ Sets the EDID information in input port.
▪ MATRIXPRO-II DVI 16x16 supports four types of EDID setting: Default Mode, Auto
Mix Mode, Output Copy Mode and Resolution Mode. For more information, refer to
Chap. 5.2.
▪ The cursor shows that it is selected and activated.
▪ Input 1 and 2 key buttons select YES and NO.
▪ Input 3 and 4 key buttons move left and right (Change EDID mode).
▪ Input 5 and 6 key buttons move down and up (Decrease and increase the port
number).
===EDID Configure===
Entry EDID
Configure? _1: Entry
1) Press input 1 key button to enter the EDID Configure Mode.
===EDID Configure===
Input: 01 Default
Default Mode?
1: Y 2: N 3: << 4: >> 5: ∨ 6: ∧
The EDID configuration that is shown next to the input number on the LCD
display is the current EDID mode