Filter
Top Products
MatrixPRO-II DVI 16x16 Router
________________________________________________________________________
User’s Guide Rev. 04
29
5.2 EDID setup
MATRIXPRO-II DVI 16x16 offers 3 types of EDID settings for easy installation with
various displays in the market. To set the EDID option for each input port, click Set
EDID button. The Setup EDID window will open.
Figure 5-3: Setup EDID Window
To set EDID information for each input, select the appropriate MODE button and click
the input channel. For each mode, multi-input channels can be selected the same time.
▪ Default mode is the default EDID as set the factory. Selecting this mode will
restore the default EDID on the selected input channels.
▪ Auto Mix mode is an advanced EDID mode. In the mode the unit reads all EDID
of attached displays and creates and custom input EDID.
▪ Output Copy mode reads the EDID from any selected output channel and
copies it into an input port. Select the output channel first and then click the
input channels. Click the Apply button to save settings.
▪ Edit Data Mode is used to modify existing EDIDs or to make a new custom
EDID. This feature is recommended for advanced users only.
▪ Resolution Mode provides the user the ability to choose an EDID based on
screen resolution. The available EDID resolutions are listed in table 7-9 in
section 7.2.6 of this document.
Improper EDID setting can compromise the stability of the system. Not all computer
graphics cards will be able to output a custom EDID resolution. Be sure you fully
understand this feature prior to use.
For further information, please contact folsomsupport@barco.com