Filter
Top Products
MatrixPRO-II DVI 16x16 Router
________________________________________________________________________
User’s Guide Rev. 04
2
Copyright
© Barco. March 24, 2013
All rights reserved. No part of this document may be copied, reproduced or translated. It shall not
otherwise be recorded, transmitted or stored in a retrieval system without the prior written consent of
Barco.
Notice
Barco provides this manual “as is” without warranty of any kind, expressed or implied, including but
not limited to the implied warranties or merchantability and fitness for a particular purpose. Barco
may make improvements and/or changes to the product(s) and/ or the program(s) described in this
publication at any time without notice.
This publication could contain technical inaccuracies or typographical errors. Changes are periodically
made to the information in this publication; these changes are incorporated in new editions of this
publication.
Federal Communications (FCC) Statement
This equipment has been tested and found to comply with the limits for a class A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area may cause harmful interference, in which case the
user will be responsible for correcting any interference.
Guarantee and Compensation
Barco provides a guarantee relating to perfect manufacturing as part of the legally stipulated
terms of guarantee. On receipt, the purchaser must immediately inspect all delivered goods for
damage incurred during transport, as well as for material and manufacturing faults Barco must be
informed immediately in writing of any complaints.
The period of guarantee begins on the date of transfer of risks, in the case of special systems and
software on the date of commissioning, at latest 30 days after the transfer of risks. In the event of
justified notice of compliant, Barco can repair the fault or provide a replacement at its own discretion
within an appropriate period. If this measure proves to be impossible or unsuccessful, the purchaser
can demand a reduction in the purchase price or cancellation of the contract. All other claims, in
particular those relating to compensation for direct or indirect damage, and also damage attributed to
the operation of software as well as to other services provided by Barco, being a component of the
system or independent service, will be deemed invalid provided the damage is not proven to be
attributed to the absence of properties guaranteed in writing or due to the intent or gross negligence
or part of Barco.
If the purchaser or a third party carries out modifications or repairs on goods delivered by Barco, or if
the goods are handled incorrectly, in particular if the systems are commissioned operated incorrectly
or if, after the transfer of risks, the goods are subject to influences not agreed upon in the contract, all
guarantee claims of the purchaser will be rendered invalid. Not included in the guarantee coverage are
system failures which are attributed to programs or special electronic circuitry provided by the
purchaser, e.g. interfaces. Normal wear as well as normal maintenance are not subject to the
guarantee provided by Barco either.
The environmental conditions as well as the servicing and maintenance regulations specified in
this manual must be complied to by the customer.