Filter
Top Products
MatrixPRO-II DVI 16x16 Router
________________________________________________________________________
User’s Guide Rev. 04
35
▪ After all input commands, MATRIXPRO-II DVI 16x16 sends back replies to conform
the execution of commands.
▪ Input and output port number range from 1 to 16 and prefix, ‘0’ can be used such
as ‘001’ and ‘010, but in the replies after the command inputs, the digits of port
number are two such as ‘01’ and ‘10’.
7.2 Examples of command inputs
7.2.1 Link input and output
▪ Makes single or multi-connections of inputs and outputs.
▪ Makes disconnection of all inputs when used with ‘0’.
▪ Requests inputs and outputs status of MATRIXPRO-II DVI 16x16.
Command Description and reply
LINK=01^10!
Makes input 1 connected to output 10.
Reply: LINK=01^10!
LINK
=1^03,04^7!
Makes input 1 connected to output 3 and 4 to 7.
Reply: LINK =01^03,04^07!
LINK =05!
Makes input 5 connected to all outputs.
Reply: LINK=05!
LINK =00!
Makes all connections disconnected.
Reply: LINK =00!
LINK =00^06!
Makes output 6 disconnected.
Reply: LINK =00^06!
Link=?!
Requests current inputs and outputs connections
status.
Reply: LINK =01^01,02^04,~16^13!
Table 7-2: Link command examples
7.2.2 Input and output status
▪ Requests input signal status. If the input is connected, it replies input resolution,
but if it is not connected, it returns ‘Signal Off’.
▪ Requests output status whether it is connected to display or not.
Command Description and reply
IN=05!
Requests input 5 status.
Reply: IN=[05] 1920x1200p! or IN=[05] Signal Off!
OUT=12!
Requests output 12 status.
Reply: OUT=[12] Un Plugged! or OUT=[12] Plugged!
Table 7-3: Input and output status command examples