Unpacking & Dimensions
2-2
5975696 BARCODATA 2100 140798
Unpacking & Dimensions
2-2
5975696 BARCODATA 2100 140798
Unpacking
To open the banding, pull on the clip as shown in the first drawing.
Take the projector out of its shipping carton and place it on a table.
For transportation, the projector is mounted on a wooden board with 3 bolts (M5). Use a 8 mm wrench
to remove these bolts.
When using the projector as a table mounted configuration, always mount the 3 plastic supporting feet
by turning in into the provided holes (see drawing on next page).
Save the original shipping carton and packing material, they will come in handy if you ever have to ship
your projector. For maximum protection, repack your projector as it was originally packed at the factory.
Contents of the shipped box :
- 1 BARCODATA 2100
- 1 remote control unit RCU + 1 9V battery
- 1 power cable with outlet plug type CEE7 or ANSI 73.11.
- 1 owners manual.
- 1 installation manual.
- 3 plastic supporting feet.
- 2 supporting feet extensions for 100% off-axis projection.
Pull
To open
1
23
4
5
Unpacking
To open the banding, pull on the clip as shown in the first drawing.
Take the projector out of its shipping carton and place it on a table.
For transportation, the projector is mounted on a wooden board with 3 bolts (M5). Use a 8 mm wrench
to remove these bolts.
When using the projector as a table mounted configuration, always mount the 3 plastic supporting feet
by turning in into the provided holes (see drawing on next page).
Save the original shipping carton and packing material, they will come in handy if you ever have to ship
your projector. For maximum protection, repack your projector as it was originally packed at the factory.
Contents of the shipped box :
- 1 BARCODATA 2100
- 1 remote control unit RCU + 1 9V battery
- 1 power cable with outlet plug type CEE7 or ANSI 73.11.
- 1 owners manual.
- 1 installation manual.
- 3 plastic supporting feet.
- 2 supporting feet extensions for 100% off-axis projection.
Pull
To open
1
23
4
5