Filter
Top Products
Random Access Adjustment Mode
5975696 BARCODATA 2100 140798
10-23
Random Access Adjustment Mode
10-23
5975696 BARCODATA 2100 140798
Blanking
Highlight Blanking by pushing the control disk up or down and press
ENTER to select.
Blanking adjustments affect only the edges of the projected image
and are used to frame the projected image on to the screen and to
hide or black out unwanted information (or noise). A 0 on the bar scale
indicates no blanking.
The Blanking can be switched [ON] or [OFF]. Select Blanking [xx] by
pushing the control disk up or down and press ENTER to toggle
between [ON] or [OFF].
When [OFF], the image is displayed without blanking. The installed
settings are still in memory for later use.
The following blanking corrections are possible :
- top blanking
- bottom blanking
- left blanking
- right blanking
- reset
When the banking ON/OFF toggle is in the OFF position and one of the
blanking adjustment is selected, the toggle jumps in the ON position.
When Reset is selected, the 4 blanking settings are set to zero. The
saved settings are erased.
GEOMETRY
SHIFT
SIZE
ZOOM
BLANKING
SCALE [1:1]
BLANKING
BLANKING [ON]
TOP
BOTTOM
LEFT
RIGHT
RESET
Select with é or ê
then <ENTER>
<EXIT> to return.
Bottom blanking
Top blanking
Right blanking
Left blanking
Blanking
Highlight Blanking by pushing the control disk up or down and press
ENTER to select.
Blanking adjustments affect only the edges of the projected image
and are used to frame the projected image on to the screen and to
hide or black out unwanted information (or noise). A 0 on the bar scale
indicates no blanking.
The Blanking can be switched [ON] or [OFF]. Select Blanking [xx] by
pushing the control disk up or down and press ENTER to toggle
between [ON] or [OFF].
When [OFF], the image is displayed without blanking. The installed
settings are still in memory for later use.
The following blanking corrections are possible :
- top blanking
- bottom blanking
- left blanking
- right blanking
- reset
When the banking ON/OFF toggle is in the OFF position and one of the
blanking adjustment is selected, the toggle jumps in the ON position.
When Reset is selected, the 4 blanking settings are set to zero. The
saved settings are erased.
GEOMETRY
SHIFT
SIZE
ZOOM
BLANKING
SCALE [1:1]
BLANKING
BLANKING [ON]
TOP
BOTTOM
LEFT
RIGHT
RESET
Select with é or ê
then <ENTER>
<EXIT> to return.
Bottom blanking
Top blanking
Right blanking
Left blanking