Filter
Top Products
14
By responding to the Enter Request: message at the end of the V93A menu
with “M” you receive a response similar to the following:
Device A (2,1).................... 1
Device B (2,2).................... 2
Device C (2,3).................... 3
Device D (2,4).................... 4
Device A (3,1).................... 5
Device B (3,2).................... 6
Device C (3,3).................... 7
Device D (3,4).................... 8
Configure ............................... C
Manual Mode ............................. M
Exit......................................X
Unit Reset .............................. R
Logout .................................. T
Enter Request: M
Enter Module number: 2
Enter Port number (<CR> for none): 3
By entering “2” at the Enter Module number and entering “3” at the Enter
Port number, the user has selected module number 2 and port number 3.
Verify the connection by insuring that the red LED of Port 3, Module 2 on the
front panel of the M-Series DAC base unit has been selected.
.4 EXIT
By responding to the Enter Request: message in the V93A Status &
Diagnostics Menu with “X” (Exit), you will exit the V93A Status &
Diagnostics Menu. The V93A host module will respond with a menu that is
similar to the following:
.1 > X