Filter
Top Products
16
By responding to the Enter Request: message in the V93A Main Menu with
“T” (Logout), you will take you out of menu mode If you have a modem
connection it will terminate that connection. The V93A host module will
respond with a message similar to the following:
Device A (2,1).................... 1
Device B (2,2).................... 2
Device C (2,3).................... 3
Device D (2,4).................... 4
Device A (3,1).................... 5
Device B (3,2).................... 6
Device C (3,3).................... 7
Device D (3,4).................... 8
Configure ............................... C
Manual Mode...... ....................... M
Exit......................................X
Unit Reset .............................. R
Logout .................................. T
Enter Request:
To return to the menu after making a connection, simply type 5 or more ‘;’
semicolons(default).
NOTE: Menu selection is case sensitive.
6 CONFIGURATION
To access configuration, bring up the menu and select option ‘C’. Select the
module number associated with the V93A. For example, if the V93A is
installed in module slot 4, select the number from the menu that is associated
with Module 4. The menu below will appear.
Status.............................1
Serial Port Configuration..........2
Port Device Name...................3
Port Select Code...................4
Attention Character................5
Disconnect Timeguard...............6
Login Password.....................7
Local Modem Setup..................8
Exit...............................X