Filter
Top Products
20
Enter Port Device Name (Max. 16 characters):
or ENTER for no change ...........:
If the Port Device Name is satisfactory, type <ENTER>. The V93A will
return to the main configuration menu.
NOTE: If the V93A Connect Port ID Echo feature is programmed for Use
Device Name, the message sent to the host device when the host selects a
V74/V75 peripheral port will be the Device Name shown in the menu above.
.4 PORT SELECT CODE
By responding with "4" (Port Select Code), you can change the Port Select
Code to any ASCII character string from 1 to 8 characters. The V93A will
respond with:
Port Select Code is................$BT
Enter Port Select Code (Max. 8 characters):
or ENTER for no change..............:
Type the desired Port Select Code followed by <ENTER>. For example, if
you type #PORT followed by <ENTER>, the V93A will respond with:
Port Select Code is................#PORT
Enter Port Select Code (Max. 8 characters):
or ENTER for no change..............:
If no additional change is desired, type "ENTER". The V93A will store the
new Port Select Code permanently into non-volatile memory and return to the
main configuration menu.
.5 ATTENTION CHARACTER
By responding with "5" (Attention Character), you can change the Attention
Character to be any ASCII character. The V93A will respond with:
Attention Character is............ ;
Change It ? (Y/N) :