Filter
Top Products
8
3 SOFTWARE UTILITY DISKETTE
IMPORTANT: Copy the BayTech original diskette onto a blank
diskette and store the original in a safe place.
BayTech provides utility software for DOS compatible PCs to assist you in
configuring your M-Series DAC unit. This diskette contains several
programs, however the only programs that will be used is TERM.EXE and
README.RDM. TERM.EXE is a terminal emulation program for DOS
compatible PCs used to configure the various features of the unit.
Please review the README.RDM file to obtain instructions for TERM.EXE.
To view the README.RDM file on your screen, first insert
the diskette into your PC's disk drive and then enter the
command TYPE README.RDM from your disk drive
prompt. To print this file, enter the command COPY
README.RDM LPT1: from your disk drive prompt
4 CABLES & ADAPTERS
The V93A modem has two modular connectors for device selection and
configuration. One connector is for connection to a dial-up line. The other
connector is used to communicate with an EIA-232 port.
.1 EIA-232 CONNECTION
Connect the eight pin modular cable(RJ-45) to the port labeled EIA-232 on
the V93A. Connect the DB9 adapter to the serial port of your PC or terminal
and then connect the other end of the cable to the RJ-45 side of the adapter.
Use adapter BayTech part number 9FRJ45PC-3 and cable, BayTech part
number RJ08X007 that come with the RPC.