Filter
Top Products
47
Chapter 8
Time and Date Setup
Use this screen to configure the BIPAC-5100S’s time and date settings. This chapter is not
available on all models.
8.1 Configuring Time Zone
To change your BIPAC-5100S’s time and date, click Time Zone. The screen appears as shown.
Use this screen to configure the BIPAC-5100S’s time based on your local time zone.
The following table describes the labels in this screen.
LABEL DESCRIPTION
Time Server
Use Time Server
when Bootup
Select the time service protocol that your time server sends when you turn on the
BIPAC-5100S. Not all time servers support all protocols, so you may have to check
with your ISP/network administrator or use trial and error to find a protocol that
works.
The main difference between them is the format.
Daytime (RFC 867) format is day/month/year/time zone of the server.