Filter
Top Products
7
Ethernet interface with the BIPAC-5100S itself as the gateway for each LAN network.
IP Policy Routing (IPPR)
Traditionally, routing is based on the destination address only and the router takes the shortest
path to forward a packet. IP Policy Routing (IPPR) provides a mechanism to override the
default routing behavior and alter the packet forwarding based on the policy defined by the
network administrator.
Protocol Support
♦ PPP (Point-to-Point Protocol) link layer protocol.
- PPP over PAP (RFC 1334).
- PPP over CHAP (RFC 1994).
♦ RIP I/RIP II
♦ IGMP Proxy
♦ ICMP support
♦ MIB II support (RFC 1213)
♦ PPPoE feature
- PPPoE idle time out
- PPPoE dial on demand
Networking Compatibility
The BIPAC-5100S is compatible with major ADSL DSLAM (Digital Subscriber Line Access
Multiplexer) providers.
Multiplexing
The BIPAC-5100S supports VC-based and LLC-based multiplexing.
Encapsulation
The BIPAC-5100S series supports PPPoA (RFC 2364 - PPP over ATM Adaptation Layer 5),
RFC 1483 encapsulation over ATM, MAC encapsulated routing (ENET Encapsulation) as well
as PPP over Ethernet (RFC 2516).
Network Management
♦ Embedded Web Configurator
♦ CLI (Command Line Interpreter)
♦ SNMP manageable
♦ DHCP Server/Client
♦ Built-in Diagnostic Tools
♦ Syslog
♦ TFTP/FTP server, firmware upgrade and configuration backup/support supported
Diagnostics Capabilities
♦ The BIPAC-5100S can perform self-diagnostic tests. These tests check the integrity
of the following circuitry:
- FLASH memory