Filter
Top Products
7
Getting Started
☞ Make sure that the batteries are inserted so that their poles point in the correct direction.
With batteries installed, the P-touch determines the remaining battery charge during
printing and feeding. If a low battery charge is detected, the low battery indicator ())
comes on. When this occurs, be sure to replace the batteries. The low battery indicator
may not come on in some operating conditions.
☞ Before replacing the batteries, make sure that the P-touch is turned off. In addition, when
replacing the batteries, insert the new ones within two minutes of removing the old ones,
otherwise the text shown in the display and any text stored in the memory will be lost.
☞ If you do not intend to use this P-touch for an extended period of time, remove the
batteries. When the power is disconnected, all text shown in the display and stored in the
memory will be lost.
Rechargeable battery pack (for PT-7600 only)
The machine has a rechargeable battery pack that allows you to use it anywhere when
charged, and an AC adapter that allows you to use it while connected to an electrical
outlet when the rechargeable battery pack’s charge becomes low.
Installing the rechargeable battery pack
☞ If you do not use the rechargeable battery pack frequently, you can increase its
useable life by charging it every six months.
1
2
3
PT75007600uk.book Page 7 Thursday, July 10, 2008 9:39 AM