Brother 7500 Label Maker User Manual


 
74
6
6
Appendix
Resetting the P-touch
You can reset the internal memory of your P-touch when you want to clear all saved
label files, or in the event the P-touch is not working properly.
1 Turn off the machine and then while holding down g and R, press o to turn
the machine back on.
2 Release g and R.
The P-touch turns on with the internal memory reset.
Troubleshooting
Release o before releasing the other keys.
All text, format settings, option settings and stored label files are cleared when you
reset the P-touch. Language and unit settings will also be cleared.
Problem Cause Solution
The screen ‘locks’, or the
P-touch does not respond
properly.
Refer to
Resetting the P-touch
on page 74 and reset the internal
memory to the initial settings. If
resetting the P-touch does not solve
the problem, disconnect the AC
adapter and remove the battery for
more than 10 minutes.
The display remains blank
after turning on the
power.
Is the AC adapter connected
correctly?
Check that the AC adapter designed
exclusively for your P-touch is
connected correctly.
Are you using the correct AC
adapter?
Make sure that you are using the
AC adapter designed exclusively
for your P-touch (included in
package).
Is the battery fitted correctly? Remove and re-install the battery.
Is the rechargeable battery pack
charged sufficiently? (for PT-7600
only)
The rechargeable battery pack’s
charge may be low. Charge the
rechargeable battery pack. (The
rechargeable battery pack’s charge
may run low even when you are not
using the P-touch.)
PT75007600uk.book Page 74 Thursday, July 10, 2008 9:39 AM