Filter
Top Products
12 - 13 TROUBLESHOOTING AND ROUTINE MAINTENANCE
3
Take the used ribbon out of the cartridge:
1
Snap out the upper white spool and slide the roll off the blue
gear. (Do not remove the blue gear)
2
Lift out the lower roll.
4
Slide the white elastic off the new refill rolls and set them down
with the full roll in the lower position. (The ribbon’s shiny side is
facing
down
.)
5
Remove the white gear and spools from the ends of the used
cardboard cores. Then insert them into the same positions in the
new cores.
Blue
Gear
Used Ribbon
Upper White Spool
Cartridge
Lower White Spool
White Gear
White Gear
White Spool