Filter
Top Products
6 - 7 SETUP SEND
Fax resolution
When you have an original in the ADF you can use the
Resolution
key to change the setting temporarily (for this fax only). Press
Resolution
repeatedly until the LCD shows the setting you want.
—OR—
You can change the default setting.
1
Press
Menu/Set
,
3
,
4
.
2
Press or to select the
resolution you want.
Press
Menu/Set
.
3
Press
Stop/Exit
.
Manual and automatic fax redial
If you are sending a fax manually and the line is busy, press
Redial/Pause
, and then press
Fax Start
to try again. If you want
to make a second call to the last number dialed, you can save time
by pressing
Redial/Pause
and
Fax Start
.
Redial/Pause
only works if you dialed from the control panel.
If you are sending a fax automatically
and the line is busy, the fax
machine will automatically redial one time after five minutes.
STANDARD
Suitable for most typed documents.
FINE
Good for small print and transmits a little
slower than Standard resolution.
S. FINE
Good for small print or artwork and transmits
slower than Fine resolution.
PHOTO
Use when the original has varying shades of
gray. This has the slowest transmission
time.
4.RESOLUTION