Filter
Top Products
1 - 12 INTRODUCTION
Connections
The external TAD must be plugged into the back side of the fax
machine, into the jack labeled EXT. The fax machine cannot work
properly if you plug the TAD into a wall jack (unless you are using
Distinctive Ring).
1
Plug the telephone line cord from the wall jack into the back side
of the fax machine, in the jack labeled LINE.
2
Plug the telephone line cord from your external TAD into the
back side of the fax machine, in the jack labeled EXT. (Make
sure this cord is connected to the TAD at the TAD’s telephone
line jack, and not its telephone set jack.)
3
Set your external TAD to four rings or less. (The fax machine’s
Ring Delay setting does not apply.)
4
Record the outgoing message on your external TAD.
5
Set the TAD to answer calls.
6
Set the Receive Mode to
TAD:ANSWER MACH.
(See
Choosing the Receive Mode
on page 5-1.)
Do not connect a TAD elsewhere on the same phone line
(unless you have the Distinctive Ring service).
TAD
TAD