Filter
Top Products
SETUP SEND 6 - 18
Memory Transmission
This feature allows the fax machine to scan a fax into its memory and
send it as soon as the scan is complete. This way, you don’t have to
wait for the entire fax to be transmitted before you retrieve your
document.
1
Insert the original face down in the ADF.
2
Press
Menu/Set
,
3
,
9
.
3
To change the default setting, press
or to select
ON
(or
OFF
).
Press
Menu/Set
.
Go to Step 5.
—OR—
For the next fax transmission only, press or to select
NEXT FAX ONLY
.
Press
Menu/Set
.
4
For the next fax only, press or to select
ON
(or
OFF
).
Press
Menu/Set
.
5
Press
1
to select additional settings. The display returns to the
SETUP SEND
menu.
—OR—
Press
2
if you are finished choosing settings and go to Step 6.
6
Enter fax number and press
Fax Start
.
If you get a
OUT OF MEMORY
message while scanning the first
page of a fax, press
Stop/Exit
to cancel the scan. If you get a
OUT OF MEMORY
message while scanning in a subsequent
page, you’ll have the option to press
Fax Start
to transmit the
pages scanned so far, or to press
Stop/Exit
to cancel the
operation. In this case, send the fax by the Manual
Transmission.
Depending on your typical faxes,
OUT OF MEMORY
errors can
occur frequently. If this happens, change the Memory
Transmission setting back to
OFF
.
9.MEMORY TX
MEMORY TX:ON
SELECT
↑
↓
& SET