Filter
Top Products
AUTO DIAL NUMBERS AND DIALING OPTIONS 7 - 3
4
Enter the phone or fax number (up to 20 digits).
Press
Set
.
5
Use the dial pad to enter the name (up to 15 characters).
Press
Set
.
(You can use the chart on page 4-3 to help you enter letters.)
—OR—
Press
Set
to store the number without a name.
6
Go to Step 2 to store another Speed-Dial number.
—OR—
Press
Stop/Exit
.
Changing One-Touch and Speed-Dial numbers
If you try to store a One-Touch or Speed-Dial number where a
number has already been stored, the LCD will show the name that
has been stored there (or number) and will ask you to do one of the
following:
1
Press
1
to change the stored
number.
—OR—
Press
2
to exit without making a
change.
2
Enter a new number.
Press
Set
.
■
To erase the whole number or whole name, press
Clear/Back
repeatedly until all digits or letters are deleted.
To erase one digit or letter, use or to position the
cursor under it, and then press
Clear/Back
.
■
If you want to insert characters, use or to position the
cursor where you want to insert them, and then type.
3
Follow the directions beginning at Step 5 in Storing One-Touch
Dial numbers and Storing Speed-Dial numbers. (See
Storing
One-Touch Dial numbers
on page 7-1 and
Storing Speed-Dial
numbers
on page 7-2.)
23.Set Auto Dial
*005:MIKE
▲
1.Change
▼
2.Exit
Select
▲▼
& Set