Filter
Top Products
1 - 11 INTRODUCTION
Status LED indications
The Status LED (Light Emitting Diode) will flash and change color
depending on the MFC status.
The LED indications shown in the table below are used in the
illustrations in this chapter.
LED LED status
LED is off.
Green Yellow Red
LED is on.
Green Yellow Red
LED is blinking.
LED MFC status Description
Sleep Mode The power switch is off or the MFC is in Sleep
mode.
Green
Warming Up The MFC is warming up for printing.
Green
Ready The MFC is ready to print.
Yellow
Receiving Data The MFC is either receiving data from the
computer, processing data in memory or
printing data.
Yellow
Data Remaining in
Memory
Print data remains in the MFC memory.