Filter
Top Products
26 Chapter 3
Manual Reception (Manual Mode)
When you set the Receive Mode to manual (the Fax and F/T lights are both off), you must answer
each incoming call yourself with an external telephone. Select this mode by pressing Mode key.
Here is what you should do when using Manual Mode:
Automatic Fax Only Reception (Fax Only Mode)
You can automatically receive all your faxes in Automatic Fax Reception mode (Fax light is on).
Select this mode by pressing Mode.
Setting the Ring Delay
The Ring Delay setting determines the number of times the machine rings before it answers in FAX
ONLY or FAX/TEL mode. (See Operation from an External or Extension Telephone, page 43. Also
see For Fax/Tel Mode Only, page 43.)
1
Press Menu, 2, 1, 1.
2
Press or to select how many times the line rings before the machine answers (01-04).
3
Press Set when the screen displays your selection.
4
Press Stop/Exit.
Setting the F/T (Fax/Tel) Ring Time (Fax/Tel Mode Only)
You need to determine how long the machine will notify you with its special F/T pseudo-ring when
you have a voice call. This ringing happens after the initial ringing from the phone company. Only
the machine rings, for 20, 30, 40 or 70 seconds; no other phones on the same line ring the special
F/T pseudo-ring. However, you can answer the call on any extension phone (in a separate wall
socket) on the same line as the machine. (See Operation from an External or Extension Telephone,
page 43.)
1
Press Menu, 2, 1, 2.
2
Press or to select how long the machine will ring to alert you that you have a voice call,
and then press Set.
3
Press Stop/Exit.
If You Get a... Then You Should...
1. Regular phone call Talk as you normally would.
2. Phone call and request to
send a fax
Press Fax Start when finished talking, and replace the
external telephone’s handset.
NOTE: Sender must also press Start.
3. Fax tone... Wait until the fax machine takes over the call or press
Fax Start.