Filter
Top Products
Making Copies 57
COPIER
Copy Quality – Default Settings
Changing Default Settings
Press Menu, 3 to change default settings for Copy mode. These settings will remain until you
change them again by pressing Menu. Adjust the Copy Mode and Contrast settings.
By pressing a number, you can adjust copy settings as shown in the following chart. Press or
to move through the selections for each setting. Press Set to save your selection. Press Stop/Exit
—OR—Press to select the next setting you want to change.
Press Menu, and 3.
Copy Mode (Type of Original)
You can select the Copy resolution for your type of original. The default setting is AUTO, which is
used for originals that contain both text and photographs. TEXT is used for originals containing only
text. PHOTO is used for copying photographs.
1
Press Menu, 3, 1.
2
Press or to choose the type of original (AUTO, TEXT or PHOTO), and then press Set.
3
Press Stop/Exit—OR—Press for additional settings.
Copy Contrast
You can adjust copy contrast to make copies darker or lighter.
1
Press Menu, 3, 2.
2
Press to make a copy lighter—OR—Press to make a copy darker, and then press Set.
3
Press Stop/Exit—OR—Press for additional settings.
TEXT
1.COPY MODE
2.CONTRAST
– +
is default
AUTO
PHOTO