Filter
Top Products
Network Scanning (For models with built-in network support)
139
11
b Specify your machine by IP address or node name. To change the IP address, enter the new IP address.
To change the node name of your machine, enter the new node name. Each node (machine) has its own
node name. You can find the node name by printing out the machine configuration page. (See Printing
the Network Configuration List in the Network User’s Guide.) The default node name is ‘BRN_xxxxxx’
(`BRW_xxxxxx` for wireless models) (where xxxxxx is the last six digits of the Ethernet address).
You can also choose a machine from the list of the machines available. Click Browse to show the list.
c Click OK.
Note
• To use ‘Scan To’ button features on the machine, click the check box for Register your computer
with the “Scan To” functions at the machine. Then enter the name you want to be displayed on the
machine LCD for your Macintosh
®
. You can use up to 15 characters.
• You can avoid receiving unwanted documents by setting a 4-digit Pin number. Enter your Pin number in
the Pin number and Retype Pin number field. To send data to a computer protected by a Pin number,
the LCD prompts you to enter the Pin number before the document can be scanned and sent to the
machine. (See Using the Scan key on page 140.)