Filter
Top Products
Chapter 4
28
Paper options 4
Paper Type 4
If you are copying on special paper, set the
machine for the type of paper you are using to
get the best print quality.
a Load your document.
b Enter the number of copies you want.
c Press a or b to choose Paper Type.
d Press d or c to choose Plain Paper,
Inkjet Paper, Brother Photo,
Other Photo or Transparency.
Press OK.
e If you do not want to change additional
settings, press Mono Start or
Colour Start.
Paper Size 4
If copying on paper other than A4 size, you
will need to change the paper size setting.
You can copy only on Letter, Legal, A4, A5 or
Photo Card [10 cm (W) × 15 cm (H)] paper.
a Load your document.
b Enter the number of copies you want.
c Press a or b to choose Paper Size.
d Press d or c to choose Letter, Legal,
A4, A5 or 10x15cm.
Press OK.
e If you do not want to change additional
settings, press Mono Start or
Colour Start.
Setting your changes as a
new default 4
You can save the copy settings for Quality,
Paper Type, Brightness, Contrast,
RED Adjust, GREEN Adjust and
BLUE Adjust that you use most often by
setting them as the default settings. These
settings will stay until you change them again.
a Press a or b to choose your new setting.
Press OK.
Repeat this step for each setting you
want to change.
b After changing the last setting, press a
or b to choose Set New Default.
Press OK.
c Press + to choose Yes.
d Press Stop/Exit.
Restoring all settings to the
factory settings 4
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
a Press a or b to choose
Factory Reset.
Press OK.
b Press + to choose Yes.
c Press Stop/Exit.