Filter
Top Products
Chapter 4
24
Turning TX Lock on/off 4
Turning TX Lock on 4
a Press Menu, 2, 0, 1.
b Press a or b to choose Set TX Lock.
Press OK.
c Enter the registered 4-digit password.
Press OK.
The machine goes offline and the LCD
shows TX Lock Mode.
Turning TX Lock off 4
a Press Menu.
b Enter the registered 4-digit password.
Press OK.
TX lock is automatically turned off.
Note
If you enter the wrong password, the LCD
shows Wrong Password and stays
offline. The machine will stay in TX Lock
mode until the registered password is
entered.
Memory Security
(FAX-1960C only)
4
Memory Security lets you prevent
unauthorized access to the machine. You will
not be able to continue to schedule Delayed
Faxes or Polling jobs. However, any
pre-scheduled Delayed Faxes will be sent
even if you turned on Memory Security, so
they will not be lost.
While memory security is On, only the
following operations are available.
Receiving faxes into memory (limited by
memory capacity)
Fax Forwarding (if Fax forwarding was
already On)
Remote Retrieval (if Fax storage was
already On)
Cordless handset
• Making a call
• Receiving a call
• Viewing Caller ID
While Memory Security is on, the following
operations are NOT available:
Printing and received faxes
Sending faxes
PC printing
Cordless handset
•Intercom
• Transfer a call
• Register cordless handset
You will not be able to schedule delayed
faxes or polling jobs when memory security is
On. However, any previously scheduled faxes
will still be sent when memory security is On.
Note
• To print the faxes in memory, turn off
Memory Security.
•
If you forget the Memory Security password,
please call Brother Customer Service.