Filter
Top Products
14 - 5
USING BROTHER MACHINE AS A PRINTER
Printing on Thicker Paper and Card Stock
When the rear cover is lifted up, the machine has a straight paper path
from the manual feed slot to the rear of the printer. Use this paper feed and
output method when you want to print on thicker paper or card stock.
1
Select manual feed mode in the printer driver.
2
Send the print data as usual.
3
Lift up the rear cover at the rear of
the machine.
4
Adjust the manual feed paper guides to the width of the paper you’re
using.
5
Insert a single sheet of paper into the manual feed slot until the front edge
touches the paper feed rollers. Let go of the paper as the machine pulls it
into position.
6
After the machine ejects the printed page, return to Step 5 to insert the
next sheet of paper. The machine will wait until you insert the next sheet
of paper. Repeat Steps 5 and 6 for each page to be printed.
7
When you have finished printing, close the rear cover of the machine.
To prevent the possibility of
transparencies smudging as they
stack in the output bin, remove
each transparency after it exits.