Filter
Top Products
18 - 1
USING BROTHER MACHINE WITH YOUR APPLE IMAC
18
18
For USB equipped Apple New Power
Macintosh G3 or iMac with Mac OS 8.5/8.6
This chapter is for the MFC 8300. If you have a MFC 8600 or MFC 8700,
please see the Multi-Function Center Software Manual.
The connection, installation and operation instructions are available on
the bundled CD-ROM for your USB equipped Apple Macintosh or iMac
with Mac OS 8.5/8.6.
1
Set up your MFC and make sure that it is working properly.
2
Unplug the MFC’s AC power cord and turn off the AC power to your
Macintosh or iMac.
3
Connect a standard USB cable to both the MFC and Macintosh or iMac.
Install Brother Printer Driver for MFC 8300
1
Turn on the power to your Macintosh G3 or iMac and wait for the startup
process to be completed.
2
Plug in the MFC power cord to turn it on.
3
Insert the Brother CD-ROM into your CD-ROM drive.
The Brother icon will appear on the desk top.
4
Double-click the Brother icon to open the CD.
5
Double-click the Brother icon again to run Start.
The screen of Brother options will appear:
Using Your Brother Machine
with Your Apple
®
New Power
Macintosh
®
G3 or iMac
™
(For MFC 8300 Only)