Filter
Top Products
ASSEMBLY AND CONNECTIONS
2 - 14
Multi-Line Connections (PBX)
Most offices use a central telephone system. While it is often relatively
simple to connect the machine to a key system or a PBX (Private Branch
Exchange), we suggest that you contact the company that installed your
telephone system and ask them to connect the machine for you. It is
advisable to have a separate line for the machine. You can then leave the
machine in FAX mode to receive faxes any time of day or night.
If the machine is to be connected to a multi-line system, ask your installer
to connect the unit to the last line on the system. This prevents the unit
from being activated each time a telephone call is received.
As with all fax units, this machine must be connected to a two wire
system. If your line has more than two wires, proper connection of the
machine cannot be made.
If you are installing the machine to work with a PBX:
1
It is not guaranteed that the unit will operate correctly under all
circumstances with a PBX. Any cases of difficulty should be reported first
to the company that handles your PBX.
2
If all incoming calls will be answered by a switchboard operator, it is
recommended that the Answer Mode be set to MANUAL. All incoming
calls should initially be regarded as telephone calls.
3
The machine may be used with either pulse or tone dialing telephone
service.
Custom Features on a Single Line
To learn how custom features may affect your faxing operations, please
see the Troubleshooting and Routine Maintenance chapter, page 17-1.