Filter
Top Products
6. Maintenance
GT-541
63
(3) Press the Up/Down Button to select the “Cap/Wiper Clean”, and then press the OK Button.
The Wiper Blade will be at the cleaning position. Follow the message and turn off the printer.
(4) Open the Front Cover by unlocking the Cover Locks with both hands.
(5) Pull out the Wiper Cleaner Cassette straight and slowly.
<Note>
Do not tilt the Wiper Cleaner Cassette; ink may get on your hands or clothing.
Do not touch the Clearance Sensor (the bar above the Wiper Cleaner Cassette).
(6) If the ink inside of the Wiper Cleaner Cassette is soiled with ink:
Wear gloves and remove the ink with a dry cloth, and then clean with a moist cloth
Inside the Wiper Cleaner Cassette