Filter
Top Products
- 11 -
(3) Press the power switch on the control panel to
turn it on. The green Start button will light up. If
the machine does not respond, check the
connection of the AC adapter.
Press the power switch again to turn the
machine off.
WARNING:
Do not plug your machine into an electrical outlet until it has been completely assembled.
Do not try to disassemble or repair this equipment yourself. Service should be performed by
authorized personnel only. Warranties will be voided if the unit is repaired by unauthorized
technicians.
Never touch the surface of the blades when installing the film cartridge.
CAUTION:
Do not turn the machine off during the laminating process.
The machine should be turned off during operation only in the event of a malfunction.