Filter
Top Products
- 20 -
Operating the machine
Laminate documents, Create magnetic signs, and laminate with adhesive back:
(1)
Open the document supporter.
(2)
Load the document to be laminated onto the
document tray. Documents should usually be
loaded face up.
(3)
Align the paper with the tab on the right and
slide the document guide until it touches the
edge of the document. Always position the
longest edge of the document to the right.
(4)
Select the Cut Mode by using Auto Cut Mode
selector switch.
Please refer to ‘How to define the cutting
position’ page 19.
TIP
When using adhesive backed laminating film,
documents that are placed face down on the
document tray can be made into window
stickers.