Brother LX-910D Laminator User Manual


 
- 15 -
Installing/replacing the film roll in the
cartridge
Cartridges can be recycled by replacing the film roll. Be sure to use Brother-authorized LC film refills only.
Refill cartridges using the following instructions:
(1)
Remove the film cartridge from the machine.
Do not grab the shutter when removing the film
cartridge from the machine.
(2)
Open the shutter of the film cartridge by sliding
the shutter in the direction of the arrows until it
locks into place. Open the film cartridge by
gently separating the clear top cover from the
gray bottom cover as indicated by the arrow on
the clear top cover.
(3)
Remove the old film roll from the cartridge.