Filter
Top Products
- 27 -
(4) Remove the film cartridge from the machine.
(5)
Remove the document from the film slit of the
cartridge.
(6)
Remove any excess laminating film by cutting
along the engraved “cutting line” on the
cartridge before reinserting the cartridge.
(7)
Set the film cartridge into the machine.
Note
Do not pull the document from the opposite
side.
Note
Make sure that the shutter of the cartridge is
closed. If open, push the shutter button to close
the shutter.
Note
Make sure that the film is set properly.
Note
Use scissors or button to extract the
jammed film and remove the film cartridge, if
necessary.